Skip to content

Forespar Sr-2 Jib Roller

Sold out
Original price $0.00 - Original price $0.00
Original price $0.00
$56.21
$56.21 - $56.21
Current price $56.21

SR-2 Jib Roller

The Forespar® SR-2 Jib Roller with fit shrouds from 3/16” thru 3/8” wire diameter. 

Use the proper size pair of insert liners according to the table below:

  • 3/8” wire – use no insert
  • 5/16” wire – use #1 inserts
  • 9/32” wire – use #2 inserts
  • ¼” wire – use #3 inserts
  • 7/32” wire – use #4 inserts
  • 3/16” wire – use #5 inserts

The Jib Rollers may be placed just above or below the spreader tips; however, installation will be easier if located below the spreaders. In this instance, you can pre-assemble the parts while on deck and reduce the possibility of losing parts while hanging in a boatswain’s chair. Have a 3 inch piece of masking tape within handy reach (stick it to the shroud).

Select the proper inserts, place them into the two halves of a hub and fit them around the shroud. Use the tape to loosely hold these parts together. Note that the hubs have two clearance screw holes at one end. Match these with the smaller holes at the other end of the other half. It is important that the mating faces of the inserts are parallel with the faces of the hub halves. Install the four screws supplied, tightening only to the extent that you can still slide the hub assembly up the wire shroud. Now remove the tape. 

Next, install the rollers. Note that one half of each roller has clearance holes for the two screws. Mate these halves that don’t have clearance holes. Run these screws tight. Now slide the Jib Roller to the desired position on the shroud and finish tightening the four hub screws until the hub interfaces are fully closed.

Shipping

We provide fast shipping options for our customers in the USA, which range anywhere from 2-7 business days with an additional 1-3 day processing time, depending on which shipping method you choose. 

To learn more about our shipping policy, click here.

Refund & Returns

The customer has 30 days after receiving the item to initiate a refund. This can be done by emailing our support team at support@mrsurveillance.com.

To learn more about our refund and returns policy, click here.

Payment Policy

We accept all credit card brands that are accepted by Stripe and Paypal. We use Stripe as our credit card payment processor and gateway. We also offer PayPal checkout as an additional payment option. These cards brands and their respective logos can be found in the footer of our website. 

We accept payment via the following methods:

  • Visa
  • Mastercard
  • American Express
  • UnionPay
  • Discover
  • JCB
  • Diners Club
  • PayPal
Contact Us

Please reach out to our incredible support team by sending an email to support@mrsurveillance.com or by filling out the form in our Contact Us page.

Our business hours are from Monday - Friday from 9am to 5pm CST. You should usually receive a response within 1-2 business days.


Mailing Address:
1109 Washington St
Pella, IA 50219

Phone:
(515) 518-8814

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)